Rover 200 & 400 Owners Club

214 Si 94 model year built Nov 93, first registered Dec 93
Non ABS with 232 solid F/Disks

Somebody has swapped out the piston/caliper assy' for scrap components and failed to replace the copper washers.

Rimmers part list has deleted these both the banjo bolts and the washers.

Can any kind soul look up the part numbers please? I can obviously supply the VIN.

If anybody can source these items please let me know ta I will buy a couple of bolts as insurance.

The car was on the road with a MOT when I bought it from Yeovil the pads should have never passed, down to the back plate on one side.

Banjo bolts are EJP6233, out of stock. Replace with SYG100510
Washers are DJP5822

These are both labelled as "Rear drums OR brake hose to calliper" so I guess they're for both front and back. It's the only type of banjo bolt specified for front and rear in the entire system. They're common between all models, too (well, 1400 and 1600 non-ABS anyway).

Rimmer Bros is out of stock of EJP6233 and SYG100510, but you can buy the Land Rover equivalent part SYG100510L (just the "L" suffix at the end of the part code) here: https://rimmerbros.com/Item--i-SYG100510L but they're £14.82 each!!!

The DJP5822 copper washers are available here: https://rimmerbros.com/Item--i-DJP5822 but they're £1.78 each.

May be worth trying to find cheaper alternatives anyway!

Bolts cheaper on eBay, e.g.: https://www.ebay.co.uk/itm/166153437637

Washers very cheap at Endon Services: https://www.allcarpartsfast.co.uk/mg-ro ... r-sealing/

Thanks for that! ordered this evening