Rover 200 & 400 Owners Club

i wanna get the twin fans used on turbo to replace my single one for extra cooling. i know i need the bracket too, i found one but heres the question: the bracket attatches to the radiator but on the opposit side? or to the chassi>? also is it the same type of connector? or will i have to cut and rewire the corect one? can someone post some pics of theirs so i can see please?

listen i dont care if its raining just get ya bum outside with cam and snap away.... jeeze a monkey could do it

Should be down at my storage at the weekend weather depending!

If no one comes up trumps sooner i'll arm myself with a camera.

thanskl

Before doing the swap, it's worth doing the maths. If I remember correctly, the single large fan actually covers almost big an area as the two small ones.

I can't remember the sizes of the fans but (for example) there is little or no difference between 2 x 9" fans and 1x 12" fan. Two 9" fans cover 125 square inches and a single 12" fan covers 113 square inches. However, once you allow for the blanked area covered by the second fan motor body, that drops to 119 square inches vs 113 square inches.

If the twins are any smaller than 9" then they cover less area than a 12" fan.

Is it going to be worth the effort?

deffo worth teh effot