Having problems with your club car? This is the place for asking advice and help on technical problems. Resident experts will be on hand to help you keep your car in tip top condition
To fit my new Portuguese splashguard engine compartment KRE10009 I would need
- CYG10006 (total 7)
- FS110207 (total 2)
Rimmers let me wait a whole month (ordered on the 13 June) to tell me today they were unable to provide me with the former (presumably in stock since the beginning)!
As my backbone forbids me to go twice under the car and as I'm pretty sure a few are missing on the old damaged splashguard, a few of the former would be enough.
They look like the screws that are used in various locations through out a R8 the heads come in two differing spanner sizes. They locate the window regulator to the glass clips? for example.
Brown & Gammons have FS110207 in stock at 60p each
For CYG10006 I bought similar to your photo from ebay in SS M6 x12 Flanged Hex Screws A2 stainless steel £2.77 for ten. ( at that price I bought a whole bunch of various sizes while I was at it to replace rusty ones)
You probably know this already but, if you're going to fit new bolts, especially stainless steel ones, I would recommend lubricating with Copaslip the first time you tighten them up.
Thank you. I knew that it's always better to lubricate bolts & plugs but I'd never heard of it on this side of the Channel but who knows?
I generally lubricate with the grease that my dad used to lubricate his father's pre-1914 8mm gun with.
I hope it does any good. Anyway it never failed.
Last edited by Dorchester on Fri Jul 14, 2023 1:34 pm, edited 1 time in total.
