Rover 200 & 400 Owners Club

davieboy · Post by **davieboy** » Mon Aug 11, 2008 11:49 pm

I am now ready to fit the alloy manifold off the old 214 to the replacement car. but its been a while since it was removed. the plastic manifold being replaced has 1 less vac pipe. my problem being can anyone point out which pipe goes where. I know 1 goes to the ecu, not sure which one *laughs*. does anyone have pics of an alloy maifold in place to show which pipe goes where. all the breakers have already removed them. HELP

which is for the ecu ?

crank · Post by **crank** » Wed Aug 13, 2008 5:37 pm

I would think the small one goes to the ecu.
Not sure on large one but doesn't it go to the charcoal cannister??

davieboy · Post by **davieboy** » Wed Aug 13, 2008 5:57 pm

not sure there is only one going to the ecu on my plastic manifold. need to find one on a car *laughs*. thanks for the reply.

E_T_V · Post by **E_T_V** » Wed Aug 13, 2008 7:17 pm

Think the above comment is right, one for the charcoal cannister (large one), and one for the ECU small one.

Martin_214 · Post by **Martin_214** » Wed Aug 13, 2008 8:08 pm

My 16V MPI with plastic manifold definately has the 2 hoses, small one to ECU, and the big one to the canister as has been said.

Was your plastic manifold off an SPI, or just missing a hose?

davieboy · Post by **davieboy** » Thu Aug 14, 2008 9:22 am

No its a MPI with no hoses missing, its a one owner 32000 miler.

ANYONE HELP WITH THIS.

ANYONE HELP WITH THIS.