[Vinny1979]

Would these be ok as opposed to a 205 40 17?

Looking at federal 595 rsr for my trackdays

[RoverRevival]

i think you'll get rubbing on full lock, 215 is massive.

[Vinny1979]

really

Its just 10mm!?



I cant get the federals in a 205, would have to be nakang ns2r semi slicks

[RoverRevival]

Its just 10mm!?

Thats what she said

[ROVER Cabby]

You can get away with it on the ZR as its got a shorter turning circle, when you throw the 17"s on the
25 you have to fit the 205's to stop it rubbing as they have a wider turning circle, guessing the 25 and
R8 share a similar if not the same setup, swap to a ZR rack ??

[JOHNDQ]

You can get away with it on the ZR as its got a shorter turning circle, when you throw the 17"s on the
25 you have to fit the 205's to stop it rubbing as they have a wider turning circle, guessing the 25 and
R8 share a similar if not the same setup, swap to a ZR rack ??

Trying to get the ZR subframe and rack onto a R8 or 200 is a major ball ache the bulkhead and floor section are completely different

[ROVER Cabby]

Yeah so suck it Vinny, John says so.

[JOHNDQ]

Wheel spacers job done

[ROVER Cabby]

Yeah wheel spacers Vinny, John says so.

[JOHNDQ]

I'm guessing you have never tried fitting the ZR front end on or never realised that the floor and steering rack are completely different